Lämmöntalteenottotornin layout-mallin kehittäminen : Valmet Technologies Oy
Määttä, Eetu (2020)
Määttä, Eetu
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202003022921
https://urn.fi/URN:NBN:fi:amk-202003022921
Tiivistelmä
Tämän opinnäytetyön toimeksiantajana toimi Valmet Technologies Oyj. Toimeksiannon tavoite oli luoda uuden lämmöntalteenottotornin (myöh. RP-torni) layout-malli ja kehittää suunnittelun työmenetelmiä. Layout-malli on luotu käyttäen Dassault Systèmes Catia V6 -ohjelmistoa.
RP-Tornin layout-mallin haluttiin vastaavan todellisia tarpeita tulevia asiakasprojekteja varten. Lisäksi vaatimuksena oli rinnakkaissuunnittelun kehittäminen ja lujuuslaskennan mahdollistaminen suoraan layout-mallista. Layout-mallista luotiin monikäyttöinen, jotta kyettäisiin ratkaisemaan useimpien projektien layout-ratkaisut.
Opinnäytetyö koostuu teoriaosuudesta ja projektia käsittelevästä osasta. Teoriaosa esittelee projektin aihetta ja toimeksiantajaa. Opinnäytetyössä perehdytään 3D-mallinnukseen, CATIAan ja lämmön talteenottoon paperi- ja kartonkikone ympäristössä. Opinnäytetyö esittelee lyhyesti Valmet Technologies Oyj:öön yrityksenä. Käsittelyosa esittelee projektia tarkemmin ja tuo esille tornin komponenttien suunnitteluratkaisuja.
Opinnäytetyöprojekti alkoi tutustumisella aiheeseen ja suunnitteluohjelmaan. Seuraavaksi testattiin mahdollisia mallinnusratkaisuja uuden lämmön talteenottotornin layout-malliin. Lopuksi mallista luotiin viimeinen versio, joka siirrettiin suunnittelukäyttöön. Kyseiselle mallille luotiin käyttöohje- ja jatkokehityssuunnitelma. This thesis is conducted by Valmet Technologies Oyj. The object of the thesis was to create a layout model for a new heat recovery tower and to improve the working methods. Layout model had been created using the Dassault Systemes Catia V6 design program.
The goal was to develop a layout model that meets to the current demands of the layout-engineering. The capabilities of parallel process of layout- and detail engineering was also to be researched during the engineering of the 3D-model. It was also agreed, that finished model should have be suitable of performing structural strength analysis. also agreed that the model should be multi-functioning so it should be easily modified to match the requirements of common projects.
Thesis consist of two part. First part introduces theory of the heat recovery methods, modelling work and it introduces Valmet Technologies Oyj company. Second part presents the development work of the 3D-layout model and introduces modelling solutions. Final part of this thesis reports and introduces subjects that could be further developed, when the layout model should be more agile and to comply stringent requirements.
RP-Tornin layout-mallin haluttiin vastaavan todellisia tarpeita tulevia asiakasprojekteja varten. Lisäksi vaatimuksena oli rinnakkaissuunnittelun kehittäminen ja lujuuslaskennan mahdollistaminen suoraan layout-mallista. Layout-mallista luotiin monikäyttöinen, jotta kyettäisiin ratkaisemaan useimpien projektien layout-ratkaisut.
Opinnäytetyö koostuu teoriaosuudesta ja projektia käsittelevästä osasta. Teoriaosa esittelee projektin aihetta ja toimeksiantajaa. Opinnäytetyössä perehdytään 3D-mallinnukseen, CATIAan ja lämmön talteenottoon paperi- ja kartonkikone ympäristössä. Opinnäytetyö esittelee lyhyesti Valmet Technologies Oyj:öön yrityksenä. Käsittelyosa esittelee projektia tarkemmin ja tuo esille tornin komponenttien suunnitteluratkaisuja.
Opinnäytetyöprojekti alkoi tutustumisella aiheeseen ja suunnitteluohjelmaan. Seuraavaksi testattiin mahdollisia mallinnusratkaisuja uuden lämmön talteenottotornin layout-malliin. Lopuksi mallista luotiin viimeinen versio, joka siirrettiin suunnittelukäyttöön. Kyseiselle mallille luotiin käyttöohje- ja jatkokehityssuunnitelma.
The goal was to develop a layout model that meets to the current demands of the layout-engineering. The capabilities of parallel process of layout- and detail engineering was also to be researched during the engineering of the 3D-model. It was also agreed, that finished model should have be suitable of performing structural strength analysis. also agreed that the model should be multi-functioning so it should be easily modified to match the requirements of common projects.
Thesis consist of two part. First part introduces theory of the heat recovery methods, modelling work and it introduces Valmet Technologies Oyj company. Second part presents the development work of the 3D-layout model and introduces modelling solutions. Final part of this thesis reports and introduces subjects that could be further developed, when the layout model should be more agile and to comply stringent requirements.