Branddimensionering av bärande väggkonstruktion i trä
Flythström, Marie (2020)
Flythström, Marie
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202004024402
https://urn.fi/URN:NBN:fi:amk-202004024402
Tiivistelmä
Syftet med detta examensarbete är att utreda hur man branddimensionerar en bärande vägg med träregelkonstruktion enligt RIL 205-2-2019, med eller utan isolering och som brandavskiljande vägg.
I början av arbetet behandlas träets materialegenskaper, varefter byggnadernas brandklasser P0, P1, P2 och P3 presenteras, därefter får läsaren reda på hur man kan sektionera en byggnad beroende på byggnadens brandklassificering.
Arbetet presenterar även teorin bakom branddimensionering och beräkningsexempel, med hänvisningar till RIL 205-2-2019. Avslutningsvis analyseras och jämförs beräkningarnas resultat. Med beräkningsresultaten granskar vi närmare de brandtekniska skillnaderna mellan konstruktionerna. Puu on tavallisin rakennusmateriaali, mutta se on palavaa materiaalia. Siksi on tärkeää, että sen palomitoitus on oikea suhteessa rakennuksen käyttötarkoitukseen.
Tämän lopputyön tarkoituksena on selvittää miten RIL 205-2-2019:n mukaan tehdään palomitoituksia. Keskenään verrataan kantavaa puurakenteista seinää, jossa joko on tai ei ole eristettä ja palo-osastoivaa seinää.
Työn alussa käsitellään puun materiaaliominaisuuksia, sen jälkeen esitellään rakennusten paloluokat P0, P1, P2 ja P3. Lopuksi lukija saa tietää miten rakennus voidaan palo-osastoida riippuen siitä mikä on rakennuksen paloluokitus.
Työ esittelee myös palomitoituksen taustalla olevan teorian sekä esimerkkilaskuja, joissa viitataan RIL 205-2-2019:ään. Lopuksi laskujen tulokset analysoidaan ja niitä verrataan keskenään. Laskutulosten avulla rakenteiden paloteknisiä eroavaisuuksia tarkastellaan lähemmin. Wood is the most commonly used construction material even if it is a combustible material. It is, therefore, important that it is correctly dimensioned in relation to what the building will be used for.
The purpose of this work is to examine how to make a fire dimensioning according to RIL 205-2-2019 (instructions given by the Organization of Construction Engineers in Finland). The work includes calculations of a wooden load-bearing wall with or without isolation and a wall with fire sectioning constructions.
In the first part of my work I discuss the properties of wood as construction material. In the next part I discuss the fire classes P0 P1, P2 and P3 for buildings. After that the reader learns about how a building can be divided into sections depending on its fire classification.
My work also presents the theory behind fire dimensioning and some examples of calculations, with references to the instructions in the RIL 205-2-2019. Finally, the results of the calculations are analysed and compared. With the help of the results of the reactions of different types of constructions, the constructions’ reactions to fire are discussed more closely.
I början av arbetet behandlas träets materialegenskaper, varefter byggnadernas brandklasser P0, P1, P2 och P3 presenteras, därefter får läsaren reda på hur man kan sektionera en byggnad beroende på byggnadens brandklassificering.
Arbetet presenterar även teorin bakom branddimensionering och beräkningsexempel, med hänvisningar till RIL 205-2-2019. Avslutningsvis analyseras och jämförs beräkningarnas resultat. Med beräkningsresultaten granskar vi närmare de brandtekniska skillnaderna mellan konstruktionerna.
Tämän lopputyön tarkoituksena on selvittää miten RIL 205-2-2019:n mukaan tehdään palomitoituksia. Keskenään verrataan kantavaa puurakenteista seinää, jossa joko on tai ei ole eristettä ja palo-osastoivaa seinää.
Työn alussa käsitellään puun materiaaliominaisuuksia, sen jälkeen esitellään rakennusten paloluokat P0, P1, P2 ja P3. Lopuksi lukija saa tietää miten rakennus voidaan palo-osastoida riippuen siitä mikä on rakennuksen paloluokitus.
Työ esittelee myös palomitoituksen taustalla olevan teorian sekä esimerkkilaskuja, joissa viitataan RIL 205-2-2019:ään. Lopuksi laskujen tulokset analysoidaan ja niitä verrataan keskenään. Laskutulosten avulla rakenteiden paloteknisiä eroavaisuuksia tarkastellaan lähemmin.
The purpose of this work is to examine how to make a fire dimensioning according to RIL 205-2-2019 (instructions given by the Organization of Construction Engineers in Finland). The work includes calculations of a wooden load-bearing wall with or without isolation and a wall with fire sectioning constructions.
In the first part of my work I discuss the properties of wood as construction material. In the next part I discuss the fire classes P0 P1, P2 and P3 for buildings. After that the reader learns about how a building can be divided into sections depending on its fire classification.
My work also presents the theory behind fire dimensioning and some examples of calculations, with references to the instructions in the RIL 205-2-2019. Finally, the results of the calculations are analysed and compared. With the help of the results of the reactions of different types of constructions, the constructions’ reactions to fire are discussed more closely.