Kysyntäjouston toteuttaminen lasivillateollisuudessa
Anttila, Mikko (2020)
Anttila, Mikko
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202005128693
https://urn.fi/URN:NBN:fi:amk-202005128693
Tiivistelmä
Tämän opinnäytetyön tarkoituksena oli selvittää kysyntäjouston soveltuvuutta Forssan lasivilla tehtaalla. Työssä tutustuttiin Fingridin tarjoamiin kysyntäjousto tuotteisiin ja niiden soveltuvuuteen Forssan tehtaalla. Työn toimeksiantajana toimii Saint-Gobain Finland Oy.
Työ aloitettiin tutkimalla tehtaan suurimmat energiankuluttajat. Sen jälkeen suoritettiin koeajoja ja tutkittiin näiden vaikutus tuotteen laatuun. Työssä selvitettiin mikä olisi paras kysyntäjousto tuote näille laitteille ja onko kysyntäjouston toteuttaminen edes mahdollista. The purpose of this thesis was to find out the suitability of demand elasticity at the Forssa glass wool plant. In this thesis, the demand elasticity products offered by Fingrid and their suitability at the Forssa plant. The work is commissioned by Saint-Gobain Finland Oy.
The work began by investigating the plant's largest energy consumers. After that test runs were performed and their effect on product quality was investigated. The study what would be the best demand elasticity product for these devices and can demand elasticity put into action?
Työ aloitettiin tutkimalla tehtaan suurimmat energiankuluttajat. Sen jälkeen suoritettiin koeajoja ja tutkittiin näiden vaikutus tuotteen laatuun. Työssä selvitettiin mikä olisi paras kysyntäjousto tuote näille laitteille ja onko kysyntäjouston toteuttaminen edes mahdollista.
The work began by investigating the plant's largest energy consumers. After that test runs were performed and their effect on product quality was investigated. The study what would be the best demand elasticity product for these devices and can demand elasticity put into action?