Lämpötilasäädeltyjen maantiekuljetusten seurantajärjestelmä
Nurmi, Ville (2020)
Nurmi, Ville
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020052513299
https://urn.fi/URN:NBN:fi:amk-2020052513299
Tiivistelmä
Tämän opinnäytetyön tarkoituksena oli suunnitella ja kehittää OY Porin Hanke AB:lle järjestelmä, joka mittaa jakeluajoneuvon sijaintia, aikaa ja päivämäärää sekä ajoneuvon tavaratilan kuljetuksen aikana tapahtuvia lämpötilan muutoksia. Järjestelmä tallentaa kerättyjen tietojen arvot ennalta luotuun tiedostoon myöhempää tarkastelua varten.
Työn teoreettisessa osassa selvitettiin työssä esiintyvien toimintatapojen sekä menetelmien perusteita. Siinä käsiteltiin satelliittipaikannuksen toimintatapaa, 3D-mallinnuksen sekä -tulostuksen toimintaperiaatteet sekä käyttömahdollisuudet sekä A/D muunnosta.
Työn toiminnallisessa osuudessa kehitettiin järjestelmä, joka lukee sekä tallentaa ajossa olevan kuljetusajoneuvon sijainnin, ajan ja sekä päivämäärän sekä ajoneuvon tavaratilan lämpötilan muutokset.
Toiminnallisessa osassa järjestelmän pohjana toimivalle Raspberry Pi -mikrotietokoneelle asennettiin käyttöjärjestelmä sekä luotiin käyttöasetukset. Tietokoneelle ohjelmoitiin kaksi ohjelmaa, joista toinen luki ja kirjoitti haluttujen tietojen arvoja ja toinen toimi graafisen käyttöliittymän ohjaimena.
Järjestelmän komponenteille 3D-mallinnettiin ja -tulostettiin suojakotelot. Järjestelmä kehitettiin OY Porin Hanke AB:n käyttöön eikä toteutuksessa kehitettyjä ohjelmien lähdekoodeja julkaista muille. The purpose of this thesis was to design and develop a system for OY Porin Hanke AB to measure the location and time and date of the delivery truck, as well as temperature changes in the luggage compartment of said vehicle during the transport and to save the collected data values for later review.
The theoretical part of this thesis explains the basics of methods used in the thesis. It covers how satellite positioning works, how 3D modeling and printing works and what are the opportunities of 3D modeling and 3D printing, as well as how A/D conversion works.
In the functional part of this thesis, a system was developed that reads and saves the values of position, time and date of the vehicle in delivery, as well as changes in temperature in the luggage compartment.
In the functional part of thesis, an operating system was installed on the Raspberry Pi microcomputer, which is the base of the system, and operating settings were created. Two programs were programmed, one for reading and writing the values of needed data and the other for acting as controller for graphical user interface.
Protective cases were 3D-modeled and -printed for components of the system.
The system was developed for OY Porin Hanke AB, therefore the system or any source-code involved will not be released for outside use.
Työn teoreettisessa osassa selvitettiin työssä esiintyvien toimintatapojen sekä menetelmien perusteita. Siinä käsiteltiin satelliittipaikannuksen toimintatapaa, 3D-mallinnuksen sekä -tulostuksen toimintaperiaatteet sekä käyttömahdollisuudet sekä A/D muunnosta.
Työn toiminnallisessa osuudessa kehitettiin järjestelmä, joka lukee sekä tallentaa ajossa olevan kuljetusajoneuvon sijainnin, ajan ja sekä päivämäärän sekä ajoneuvon tavaratilan lämpötilan muutokset.
Toiminnallisessa osassa järjestelmän pohjana toimivalle Raspberry Pi -mikrotietokoneelle asennettiin käyttöjärjestelmä sekä luotiin käyttöasetukset. Tietokoneelle ohjelmoitiin kaksi ohjelmaa, joista toinen luki ja kirjoitti haluttujen tietojen arvoja ja toinen toimi graafisen käyttöliittymän ohjaimena.
Järjestelmän komponenteille 3D-mallinnettiin ja -tulostettiin suojakotelot. Järjestelmä kehitettiin OY Porin Hanke AB:n käyttöön eikä toteutuksessa kehitettyjä ohjelmien lähdekoodeja julkaista muille.
The theoretical part of this thesis explains the basics of methods used in the thesis. It covers how satellite positioning works, how 3D modeling and printing works and what are the opportunities of 3D modeling and 3D printing, as well as how A/D conversion works.
In the functional part of this thesis, a system was developed that reads and saves the values of position, time and date of the vehicle in delivery, as well as changes in temperature in the luggage compartment.
In the functional part of thesis, an operating system was installed on the Raspberry Pi microcomputer, which is the base of the system, and operating settings were created. Two programs were programmed, one for reading and writing the values of needed data and the other for acting as controller for graphical user interface.
Protective cases were 3D-modeled and -printed for components of the system.
The system was developed for OY Porin Hanke AB, therefore the system or any source-code involved will not be released for outside use.