Comparative analysis of Finnish and Russian regulating documents on water supply and drainage of residential buildings
Belobratova, Maria (2011)
Belobratova, Maria
Mikkelin ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2011101413823
https://urn.fi/URN:NBN:fi:amk-2011101413823
Tiivistelmä
The main subject of this thesis is to compare Finnish and Russian norms on water supply and drainage of residential buildings. It is very important to know the difference between them in order to communicate well on this field and to have possibility of international building design projects.
There is great variety of regulations and guidelines related to this topic both in Finland and in Russia. The main documents used here are The national building code of Finland, regulations and guidelines 2007, part D1 and SNIP 2.01.04-85(2000): Inner water supply and drainage. In this thesis the main parameters, the process of design and dimensioning of an example building according to the docu-ments mentioned above are compared.
The main results of the comparison are that the main parameters are mostly the same with several minor discrepancies. But this affects on the design and dimensioning so that it should be done from the start to the end according to one or another document. That is why the combination is impossible. The only way is to make two design projects and then to compare and find common decision. This is the only suitable solution for international design projects between Finland and Russia.
There is great variety of regulations and guidelines related to this topic both in Finland and in Russia. The main documents used here are The national building code of Finland, regulations and guidelines 2007, part D1 and SNIP 2.01.04-85(2000): Inner water supply and drainage. In this thesis the main parameters, the process of design and dimensioning of an example building according to the docu-ments mentioned above are compared.
The main results of the comparison are that the main parameters are mostly the same with several minor discrepancies. But this affects on the design and dimensioning so that it should be done from the start to the end according to one or another document. That is why the combination is impossible. The only way is to make two design projects and then to compare and find common decision. This is the only suitable solution for international design projects between Finland and Russia.