Öljypolttimen paloilman säätöpellin toimilaitteen vertailu
Lehtonen, Aake (2020)
Lehtonen, Aake
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020052513320
https://urn.fi/URN:NBN:fi:amk-2020052513320
Tiivistelmä
Tämän opinnäytetyön tarkoituksena oli perehtyä höyrykattiloissa käytettävän KBSA-öljypolttimen paloilman säätöpellin toimilaitteiden käytössä oleviin ohjaustapoihin. Tässä opinnäytetyössä esitellään myös säätöpellin ohjauksen toimintaperiaatetta. Opinnäytetyö tehtiin Alfa Laval Aalborg Oy:lle.
Tutkimustyö aloitettiin etsimällä tietoa toimilaitteista, haastattelemalla Alfa Laval Aalborg Oy:n työntekijöitä ja tutkimalla kattilajärjestelmien toimintaa. Tämän jälkeen tietoja vertailtiin ja analysoitiin.
Haasteina opinnäytetyössä olivat säätöpeltiä koskevien tietojen löytäminen, sekä rajoitettu pääsy oppilaitoksen kirjallisuuteen koronaviruksen takia.
Työn tuloksena saatiin pienimuotoinen vertailu ohjaustapojen välillä. Työ suoritettiin helmikuun ja toukokuun välisenä aikana vuonna 2020. The purpose of this thesis was to familiarize with the control systems used in combustion air control dampers of KBSA-burners in steam boilers. This thesis also presents the operating principles of the combustion air damper. The thesis was made for Alfa Laval Aalborg Oy.
The research began by searching information on actuators, interviewing employees of Alfa Laval Aalborg Oy and examining the function of steam boiler systems. After this, the information was analyzed and compared.
The challenges of the thesis were finding the information about damper and restricted access to literature of SAMK due to coronavirus.
The outcome was a slight comparison between control systems. This work was conducted between February and May in 2020.
Tutkimustyö aloitettiin etsimällä tietoa toimilaitteista, haastattelemalla Alfa Laval Aalborg Oy:n työntekijöitä ja tutkimalla kattilajärjestelmien toimintaa. Tämän jälkeen tietoja vertailtiin ja analysoitiin.
Haasteina opinnäytetyössä olivat säätöpeltiä koskevien tietojen löytäminen, sekä rajoitettu pääsy oppilaitoksen kirjallisuuteen koronaviruksen takia.
Työn tuloksena saatiin pienimuotoinen vertailu ohjaustapojen välillä. Työ suoritettiin helmikuun ja toukokuun välisenä aikana vuonna 2020.
The research began by searching information on actuators, interviewing employees of Alfa Laval Aalborg Oy and examining the function of steam boiler systems. After this, the information was analyzed and compared.
The challenges of the thesis were finding the information about damper and restricted access to literature of SAMK due to coronavirus.
The outcome was a slight comparison between control systems. This work was conducted between February and May in 2020.