Pientalon rakennus- ja rakennesuunnittelu
Lappi, Miro (2020)
Lappi, Miro
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020102721685
https://urn.fi/URN:NBN:fi:amk-2020102721685
Tiivistelmä
Opinnäytetyön tarkoituksena oli laatia rakennussuunnitelmat, rakennepiirustukset ja mitoittaa seinä- ja kattorakenteet yksikerroksiseen omakotitaloon. Talolle ei ollut tonttia, joten kaavamääräykset olivat viitteelliset. Talon kantavat rakenteet toteutettiin puusta ja yläpohja NR-ristikoilla.
Rakennussuunnitelmat ja rakennepiirustukset laadittiin AutoCAD-ohjelmalla. Puurakenteet mitoitettiin Mathcad-ohjelmaa apuna käyttäen. Luonnoskuvat tehtiin ArchiCAD-ohjelmalla.
Työn pääpaino oli syntyvissä rakennus- ja rakennepiirustuksissa sekä mitoituksessa, joiden avulla olisi mahdollista tulevaisuudessa hakea rakennuslupaa. The objective of this Bachelor’s thesis was the architectural and structural planning and designing of the wall and roof structures for a one floor detached house. The house had no building site so the building regulations are fictional. The building material used were wood in the walls and trusses on the roof.
The architectural and structural plans were drawn with the AutoCAD 2020 program. The wooden structures were designed by hand with the Mathcad program. 3D sketches were made with the ArchiCAD 22 program.
The primary focus for this thesis was the architectural and structural drawings as well as designing to allow filing a building permit in the future.
Rakennussuunnitelmat ja rakennepiirustukset laadittiin AutoCAD-ohjelmalla. Puurakenteet mitoitettiin Mathcad-ohjelmaa apuna käyttäen. Luonnoskuvat tehtiin ArchiCAD-ohjelmalla.
Työn pääpaino oli syntyvissä rakennus- ja rakennepiirustuksissa sekä mitoituksessa, joiden avulla olisi mahdollista tulevaisuudessa hakea rakennuslupaa.
The architectural and structural plans were drawn with the AutoCAD 2020 program. The wooden structures were designed by hand with the Mathcad program. 3D sketches were made with the ArchiCAD 22 program.
The primary focus for this thesis was the architectural and structural drawings as well as designing to allow filing a building permit in the future.