The production process of an audio CD : An amateur demo from scratch to record
Syvänperä, Petrus (2011)
Syvänperä, Petrus
Jyväskylän ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2011060811405
https://urn.fi/URN:NBN:fi:amk-2011060811405
Tiivistelmä
Jokainen musiikin alalla työskentelevä törmää ennen pitkää levyn tuotantoprosessiin. Tämä prosessi ei välttämättä ole kaikille niin yksinkertainen kun nopeasti ajateltuna luulisi. Tämä työ alkoi tekijän henkilökohtaisena harrastusprojektina, mutta kehittyi lopulta käymään prosessin läpi niin, että se voitiin analysoida pala palalta tähän opinnäytetyöhön. Tavoite oli käydä kokonaisuudessaan äänilevyn tuotantoprosessi läpi yksinkertaisella, mutta opastavalla tavalla niin, että musiikin alan aloittelijat saavat tutustua mitä kaikkea se pitää sisällään.
Työn tekijä halusi olla mukana henkilökohtaisesti niin monessa tuotantovaiheessa kuin mahdollista. Levyn idea juontaa juurensa muutaman vuoden taakse, mutta itse toteutus alkoi pari vuotta sitten osien tapailuilla, joista osa päätyikin lopulliselle tuotteelle. Tämän jälkeen alkoi pitkä prosessi, joka sisälsi taiteellisia linjauksia, säveltämistä, visuaalista suunnittelua, esinauhoituksia, soittajien ja yhteistyökumppaneiden etsimistä, ohjelmien opiskelua ja harjoittelua ym. Valitettavasti yhdeksi toimintatavaksi muodostui virheistä oppiminen. Projektista muodostui pitkä, mutta erittäin antoisa.
Tuloksena syntynsä sai neljän kappaleen ja 26 minuutin CD. Se sisältää osan tekijästä itsestään, mutta myös oppitunnin siitä mistä koko prosessi koostuu. Tämä raportti kuvaa työn vaiheet, muttei valitettavasti sitä mitä kaikkea se vaatii. Paras tapa oppia on käydä koko prosessi itse läpi. Every actor in the music business comes cross with an audio CD production in one way or another. Those who have not been part of such production might not have a thorough picture of the total process and what it entails. This thesis was started as a personal project but it became a scan through the process in a way that it could be reported as a project paper. The goal was to give guidelines to music business novices who need to know what phases a CD production consists of.
The author of this thesis wanted to be personally part of as many phases as possible. The idea of this record was conceived a long time ago, but the implementation itself started a few years ago with compositions of some of the parts that ended up on the CD. After this started a process of artistic decisions, compositions, cover design planning, pre-recordings, cooperation plans, programming, learning to use the instruments and recording programs etc. Unfortunately, failure was one of the methods, but it gave the possibility to improve every phase. The whole project was long but very rewarding.
As a result, a CD of four songs with a total of 26 minutes of playing time was produced. It has parts of the author in it, who also learned a lesson of what that kind of project entails at its easiest. In this project report one can see what the phases are, not what it takes to implement the project. The best way to learn is to go through the whole process.
Työn tekijä halusi olla mukana henkilökohtaisesti niin monessa tuotantovaiheessa kuin mahdollista. Levyn idea juontaa juurensa muutaman vuoden taakse, mutta itse toteutus alkoi pari vuotta sitten osien tapailuilla, joista osa päätyikin lopulliselle tuotteelle. Tämän jälkeen alkoi pitkä prosessi, joka sisälsi taiteellisia linjauksia, säveltämistä, visuaalista suunnittelua, esinauhoituksia, soittajien ja yhteistyökumppaneiden etsimistä, ohjelmien opiskelua ja harjoittelua ym. Valitettavasti yhdeksi toimintatavaksi muodostui virheistä oppiminen. Projektista muodostui pitkä, mutta erittäin antoisa.
Tuloksena syntynsä sai neljän kappaleen ja 26 minuutin CD. Se sisältää osan tekijästä itsestään, mutta myös oppitunnin siitä mistä koko prosessi koostuu. Tämä raportti kuvaa työn vaiheet, muttei valitettavasti sitä mitä kaikkea se vaatii. Paras tapa oppia on käydä koko prosessi itse läpi.
The author of this thesis wanted to be personally part of as many phases as possible. The idea of this record was conceived a long time ago, but the implementation itself started a few years ago with compositions of some of the parts that ended up on the CD. After this started a process of artistic decisions, compositions, cover design planning, pre-recordings, cooperation plans, programming, learning to use the instruments and recording programs etc. Unfortunately, failure was one of the methods, but it gave the possibility to improve every phase. The whole project was long but very rewarding.
As a result, a CD of four songs with a total of 26 minutes of playing time was produced. It has parts of the author in it, who also learned a lesson of what that kind of project entails at its easiest. In this project report one can see what the phases are, not what it takes to implement the project. The best way to learn is to go through the whole process.