Tapitussolun käyttöönoton suunnittelu huonekalutehtaassa
Vilén, Timo (2021)
Vilén, Timo
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202104265785
https://urn.fi/URN:NBN:fi:amk-202104265785
Tiivistelmä
Tämän opinnäytetyön aiheena oli tehdä robottikäyttöinen tapitussolu huonekaluliike Niemen tehtaat Oy:lle. Työn tavoitteena oli kehittää yrityksen automatisointitasoa, sekä tehostaa tuotantoa Koch -tapituskoneella robottia käyttäen. Työ käsittelee robotti käyttöisen tapitussolun rakentamista ja suunnittelua, pohjapiirustuksen laadintaa, sekä tarttujan kokoluokan etsintää ja solun käyttöönottoa.
Työn suunnittelu ja rakentaminen toteutettiin yhteistyössä Ferob Oy:n yrityksen henkilöstön kanssa. Robotin tilaajan Niemen tehtaat Oy:n kanssa pidimme palavereja solun kehitykseen liittyen. Tehtaalle tehtiin myös useita tuotantokäyntejä tapitussolun paikkaan liittyen. Tapitussoluun tehtiin käyttöönotto tarkastus Niemen tehtaiden toimitusjohtajan toimesta. Tämän perusteella työ ja tapitussolun käyttöönotto hyväksyttiin.
Tuloksena toteutui robotti käyttöinen tapitussolu, johon laaditun ohjelman pohjalta soluun pystytään tekemään helpommin uusia ohjelmia. Tapitussoluun luotiin myös ohjeet ohjelman lukemiseksi. Ohjeena laadittiin lohkokaavio, joka helpottaa operaattoria työn tekemisessä ja ohjelman lukemisessa. The topic of this thesis was to make a robot-powered clapping cell for furniture store Niemen tehtaat Oy. The aim of the work was to develop the company's automation level and to improve production with the Koch pin machine using a robot. The work deals with the construction and design of a robot-powered clapping cell. Drawing a floor plan, as well as searching for the size class of the sticker and deploying the cell.
The planning and construction of the work was carried out in cooperation with the personnel of Ferob Oy's company. The development with Niemi Factories Ltd, a cell and robot subscriber, was to hold meetings related to the development of the cell. Several production visits were also made to the factory in connection with the location of the clapping cell. The taping cell was commissioned by the CEO of Niemi's factories. On this basis, the work and the introduction of the clapping cell were approved.
The result was a robot-based clapping cell, which can be used more easily to make new programs based on the programme. A pin to the cell was also created with instructions, to read the program. The help was a block diagram that makes it easier for the operator to do the job and read the program.
Työn suunnittelu ja rakentaminen toteutettiin yhteistyössä Ferob Oy:n yrityksen henkilöstön kanssa. Robotin tilaajan Niemen tehtaat Oy:n kanssa pidimme palavereja solun kehitykseen liittyen. Tehtaalle tehtiin myös useita tuotantokäyntejä tapitussolun paikkaan liittyen. Tapitussoluun tehtiin käyttöönotto tarkastus Niemen tehtaiden toimitusjohtajan toimesta. Tämän perusteella työ ja tapitussolun käyttöönotto hyväksyttiin.
Tuloksena toteutui robotti käyttöinen tapitussolu, johon laaditun ohjelman pohjalta soluun pystytään tekemään helpommin uusia ohjelmia. Tapitussoluun luotiin myös ohjeet ohjelman lukemiseksi. Ohjeena laadittiin lohkokaavio, joka helpottaa operaattoria työn tekemisessä ja ohjelman lukemisessa.
The planning and construction of the work was carried out in cooperation with the personnel of Ferob Oy's company. The development with Niemi Factories Ltd, a cell and robot subscriber, was to hold meetings related to the development of the cell. Several production visits were also made to the factory in connection with the location of the clapping cell. The taping cell was commissioned by the CEO of Niemi's factories. On this basis, the work and the introduction of the clapping cell were approved.
The result was a robot-based clapping cell, which can be used more easily to make new programs based on the programme. A pin to the cell was also created with instructions, to read the program. The help was a block diagram that makes it easier for the operator to do the job and read the program.