Näytä suppeat kuvailutiedot

Uuden menetelmän kehitys halogeenikuivaimella AKD- ja hartsipohjaisille liimoille

Siekkinen, Evelina (2022)

dc.contributor.authorSiekkinen, Evelina
dc.date.accessioned2022-05-31T09:21:56Z
dc.date.available2022-05-31T09:21:56Z
dc.date.issued2022-
dc.identifier.urihttp://www.theseus.fi/handle/10024/751526
dc.description.abstractOpinnäytetyön toimeksiantajana toimi Tampereella sijaitseva Solenis Finland Oy. Yritys valmistaa erikoiskemikaaleja paperiteollisuuteen. Tehtaalla olevassa laadunvalvontalaboratoriossa tuotteita testataan valmistuksen aikana ja ennen asiakkaalle vientiä varmistaakseen jokaisen erän laadun, säilyvyyden ja turvallisuuden. Tehtaalla valmistetaan mm. AKD- ja hartsiliimoja, joita käytetään paperin ja pahvin liimausaineena. Tuotteista analysoidaan monia eri ominaisuuksia, kuiva-ainepitoisuus mukaan lukien. Opinnäytetyön tavoitteena oli kehittää toimivat ja tarkat kuiva-ainemääritysmenetelmät halogeenilaitteella kahdelle AKD-liimalle ja yhdelle hartsiliimalle niin, että tulokset olisivat mahdollisimman lähellä uunikuiva-ainemäärityksen tuloksia. Tehtaan tuotteiden nimet sekä niiden raaka-aineiden nimet ovat luottamuksellista tietoa. Tämän takia tässä opinnäytetyössä näytteet nimetään A, B ja C. Tarkoituksena oli perehtyä Soleniksen laiteohjeisiin ja muuhun kuiva-aineanalyyseihin liittyvään kirjallisuuteen. Lisäksi kehitettiin jokaiselle tuotteelle oma ohjelma ja testattiin sillä riittävästi rinnakkaisnäytteitä. Tulokset analysoitiin, tutkittiin toistettavuus ja pohdittiin mahdolliset virhelähteet. Työn tuloksena saatiin toimivat kuiva-ainemääritysohjelmat halogeenilaitteella kaikille kolmelle paperikemikaalille, joiden korjauskertoimet ovat huomattavasti pienempiä kuin edellisten käytössä olevien ohjelmien korjauskertoimet. Menetelmät hyväksyttiin ja otettiin käyttöön. Menetelmiä voitaisiin jatkossa muokata hienosäätämällä lämpötilaa ja aikaa. Seuraavissa menetelmäkehityksissä kannattaa testata lopullinen ohjelma mahdollisimman monella eri erällä. Lisäksi alumiiniastiat ja suodatuspaperit voitaisiin kuivattaa uunissa ja säilyttää eksikaattorissa.fi
dc.description.abstractThis thesis was generated for Solenis Finland Oy which manufactures specific chemicals for paper industries. In the quality control laboratory products are tested for many features, inter alia dry content. The testing of samples guarantees the quality, long preservation and effectivity of products. The purpose of this thesis was to develop new halogen analyser methods for two alkyl ketene dimer sizing agents and one fluid rosin sizing agent. Background data were collected from Solenis technical guides, earlier bachelor’s theses, and articles. Halogen results have been compared to oven method results and analyzed. The aim of developing the halogen moisture analyser methods was reached with the fluid rosin sizing agent method. However, there were some troubles in developing an accurate method for two alkyl ketene dimer sizing agents because of differences in the quality of some batches. However, working and accurate enough methods were found, approved and put into service in the quality control laboratory. The new methods take less than 15 minutes, the averages are -0,22, -0,22, 0,02 and the standard deviations are 0,08, 0,05 and 0,04. As a suggestion the methods could be tested more with different batches and the temperature, the ramp time and the switch off criteria could be fine-tuned. The aluminium pans and the filter papers could be dried in the oven and stored in the desiccator.en
dc.language.isofin-
dc.rightsfi=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|sv=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|en=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|-
dc.titleUuden menetelmän kehitys halogeenikuivaimella AKD- ja hartsipohjaisille liimoille-
dc.type.ontasotfi=AMK-opinnäytetyö|sv=YH-examensarbete|en=Bachelor's thesis|-
dc.identifier.urnURN:NBN:fi:amk-2022053013019-
dc.subject.degreeprogramfi=Laboratorioala|sv=Laboratoriebranschen|en=Laboratory Services|-
dc.subject.ysoanalyysi-
dc.subject.ysolaboratoriotekniikka-
dc.subject.ysoopinnäytteet-
dc.subject.ysolaboratoriot-
dc.subject.ysolaatu-
dc.subject.ysomittaus-
dc.subject.ysoraaka-aineet-
dc.subject.ysomassa- ja paperiteollisuus-
dc.subject.ysokemia-
dc.subject.ysopaperinvalmistus-
dc.subject.ysoliimaus-
dc.subject.ysokosteus-
dc.subject.ysopitoisuus-
dc.subject.ysolaboratoriotekniikka-
dc.subject.ysotehtaat-
dc.subject.ysoanalyysimenetelmät-
dc.subject.ysoanalyyttinen kemia-
dc.subject.ysokemiallinen koostumus-
dc.subject.ysovesianalyysi-
dc.subject.ysotuotteet-
dc.subject.ysoominaisuudet-
dc.relation.contractorSolenis Finland Oy-
dc.subject.disciplineLaboratoriotekniikan tutkinto-ohjelma-
annif.suggestions.linkshttp://www.yso.fi/onto/yso/p6851|http://www.yso.fi/onto/yso/p2862|http://www.yso.fi/onto/yso/p19594|http://www.yso.fi/onto/yso/p1380|http://www.yso.fi/onto/yso/p8598|http://www.yso.fi/onto/yso/p5029|http://www.yso.fi/onto/yso/p4794|http://www.yso.fi/onto/yso/p3443|http://www.yso.fi/onto/yso/p8691|http://www.yso.fi/onto/yso/p12559fi


Tiedostot

Thumbnail

Viite kuuluu kokoelmiin:

Näytä suppeat kuvailutiedot