Study of Marine Approved HMIs and Panel PCs: market analysis of HMIs and panel PCs used in marine environments
Ollqvist, Alexander (2023)
Ollqvist, Alexander
2023
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2023060923335
https://urn.fi/URN:NBN:fi:amk-2023060923335
Tiivistelmä
This thesis contains a market analysis of what HMIs and panel PCs there are on the market that are approved for marine use. The market for marine approved products is quite limited and therefore a large number of results were not expected.
This is being done to find a substitute for the current HMI that WE Tech Solutions are using. The products that are analyzed are evaluated according to WE Techs’ needs and requirements. This limits several things such as the sizes of the products, and some software and hardware requirements. But also that the operating system must be Linux.
The research process consisted of searching for companies that market their products as marine approved, and finding out the relevant information from user manuals and technical specifications. Suppliers were contacted to acquire the information in the previously mentioned documents. The research is from the point of view of WE Techs’ needs. That is why information that is not relevant to the requirements will not be brought forward in this thesis.
There were seven products found that fulfilled the DNV certification requirement. These were then evaluated based on the other requirements using a matrix. From this, the two highest-scoring products were an HMI and a panel PC that fulfilled a majority of requirements and could be good substitutes. Detta examensarbete innehåller en marknadsanalys om vilka HMI:er och panel PC:er som finns på marknaden och som är godkända för användning i marin miljö. Marknaden för marina produkter är ganska begränsad och därför förväntas inte ett stort antal resultat.
Detta arbete görs för att hitta ett substitut för det nuvarande HMI som WE Tech solutions använder. Produkterna som analyseras bedöms efter WE Techs behov och krav. Detta begränsar flera saker så som storleken på produkterna, vissa krav på mjukvara och hårdvara, så som att operativsystemet måste vara Linux.
Undersökningen bestod av att leta upp företag som marknadsför sina produkter godkända för marina förhållanden. Där efter ta reda på relevant information från användarmanualer och tekniska specifikationer. Leverantörerna kontaktades för att få den information som inte kunde hittas i de tidigare nämnda dokumenten. Analysen är utifrån WE Techs behov. Därför kommer information som inte är relevant för kraven inte att tas fram i detta dokument.
Det hittades sju produkter som uppfyllde DNV:s certifieringskrav. Dessa utvärderades sedan på de övriga kraven med hjälp av en matris. De två produkter med högst poäng var en HMI och en panel-PC som uppfyllde majoriteten av kraven och kunde vara bra substitut.
This is being done to find a substitute for the current HMI that WE Tech Solutions are using. The products that are analyzed are evaluated according to WE Techs’ needs and requirements. This limits several things such as the sizes of the products, and some software and hardware requirements. But also that the operating system must be Linux.
The research process consisted of searching for companies that market their products as marine approved, and finding out the relevant information from user manuals and technical specifications. Suppliers were contacted to acquire the information in the previously mentioned documents. The research is from the point of view of WE Techs’ needs. That is why information that is not relevant to the requirements will not be brought forward in this thesis.
There were seven products found that fulfilled the DNV certification requirement. These were then evaluated based on the other requirements using a matrix. From this, the two highest-scoring products were an HMI and a panel PC that fulfilled a majority of requirements and could be good substitutes.
Detta arbete görs för att hitta ett substitut för det nuvarande HMI som WE Tech solutions använder. Produkterna som analyseras bedöms efter WE Techs behov och krav. Detta begränsar flera saker så som storleken på produkterna, vissa krav på mjukvara och hårdvara, så som att operativsystemet måste vara Linux.
Undersökningen bestod av att leta upp företag som marknadsför sina produkter godkända för marina förhållanden. Där efter ta reda på relevant information från användarmanualer och tekniska specifikationer. Leverantörerna kontaktades för att få den information som inte kunde hittas i de tidigare nämnda dokumenten. Analysen är utifrån WE Techs behov. Därför kommer information som inte är relevant för kraven inte att tas fram i detta dokument.
Det hittades sju produkter som uppfyllde DNV:s certifieringskrav. Dessa utvärderades sedan på de övriga kraven med hjälp av en matris. De två produkter med högst poäng var en HMI och en panel-PC som uppfyllde majoriteten av kraven och kunde vara bra substitut.