Small Linear Induction Motor : Design and Construction
Ulhaq, Anwar (2017)
Metropolia Ammattikorkeakoulu
2017
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201702272738
https://urn.fi/URN:NBN:fi:amk-201702272738
Tiivistelmä
The study was carried out to design a 3-phase Small Linear Induction Motor that can travel at the speed of 1 meter per second when supplied 9 Volts.
In order to complete the goal of the study, first, physical dimensions and electrical properties were calculated by using MathCAD software and through mathematical equations, providing initial or required motor specifications. The obtained physical dimensions were then used to draw motor drawings using AutoCAD program, which was also used to laser cut the MS sheets according to drawings. All MS sheets were welded together and Primary part of motor was then winded whereas, Secondary part was filled by Aluminium. Bearings were fixed to the Primary part to withstand normal forces and maintain gap in between Primary and Secondary.
The goal of study was successfully achieved as the motor was designed and build. As this was a lengthy process, unfortunately, there was not enough time to test the motor.
In order to complete the goal of the study, first, physical dimensions and electrical properties were calculated by using MathCAD software and through mathematical equations, providing initial or required motor specifications. The obtained physical dimensions were then used to draw motor drawings using AutoCAD program, which was also used to laser cut the MS sheets according to drawings. All MS sheets were welded together and Primary part of motor was then winded whereas, Secondary part was filled by Aluminium. Bearings were fixed to the Primary part to withstand normal forces and maintain gap in between Primary and Secondary.
The goal of study was successfully achieved as the motor was designed and build. As this was a lengthy process, unfortunately, there was not enough time to test the motor.