On-line as-built modelling : Learnings from industrial demonstrations
Heimonen, Teuvo (2017)
Lapin ammattikorkeakoulu
2017
Julkaisun pysyvä osoite on
https://urn.fi/URN:ISBN:978-952-316-177-1
https://urn.fi/URN:ISBN:978-952-316-177-1
Tiivistelmä
In the New possibilities of 3D measurements and modelling -project, run by Optical Measurement Laboratory of Lapland University of Applied Scienc¬es, a new kind of approach for as-built modelling has been developed. The approach is based on parametric modelling and object designated measure¬ments of 3D points. In order to minimize the manual modelling work, the fea¬sibility of the approach for modelling measured objects automatically on-line (modelling while measuring) was stressed in the development work.
Proposed as-built modelling approach proved to be feasible alternative es¬pecially for modelling the indoors of the buildings. Also industrial designers dealing with as-built modelling tasks in which all-inclusive point clouds are not needed, may find the findings of the study interesting.
In this publication both the main principles of the implementation of the ap¬proach and learnings from four industrial demonstrations are presented. Topics for further research and development are also suggested.
Proposed as-built modelling approach proved to be feasible alternative es¬pecially for modelling the indoors of the buildings. Also industrial designers dealing with as-built modelling tasks in which all-inclusive point clouds are not needed, may find the findings of the study interesting.
In this publication both the main principles of the implementation of the ap¬proach and learnings from four industrial demonstrations are presented. Topics for further research and development are also suggested.