Automated Testing Process for D-Fend Water Trap
Claassen, Joshua (2017)
Metropolia Ammattikorkeakoulu
2017
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2017052610463
https://urn.fi/URN:NBN:fi:amk-2017052610463
Tiivistelmä
In this thesis testing methods were explored and developed in order to implement automated product testing. General Electric (GE) Healthcare Finland is designing a new, fully automated, assembly line and this project was one part of that line. The aim was to modify current testing methods to be performed by an ABB YuMi robot while maintaining product quality compliance.
The project encompassed creating a new testing metric. This included researching current testing methods that were performed manually and developing a new system that could be performed by a robot. New testing metrics needed to be explored to replace a manual visual examination. Designing additional equipment and methods to aid the robot was also necessary.
A new testing metric and process proposal have been submitted to GE Healthcare Finland for review and are awaiting approval to be executed. Testing was done at a workbench and some designs are merely concepts of possible solutions.
The project encompassed creating a new testing metric. This included researching current testing methods that were performed manually and developing a new system that could be performed by a robot. New testing metrics needed to be explored to replace a manual visual examination. Designing additional equipment and methods to aid the robot was also necessary.
A new testing metric and process proposal have been submitted to GE Healthcare Finland for review and are awaiting approval to be executed. Testing was done at a workbench and some designs are merely concepts of possible solutions.