Interlocking and Data Acquisition in a High Voltage System
Puurula, Pertti (2019)
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201905098555
https://urn.fi/URN:NBN:fi:amk-201905098555
Tiivistelmä
Tässä opinnäytetyössä selvitettiin ABB:n älykkään sähköaseman ohjaus- ja suojauslaitteen soveltuvuutta tulevaan Wärtsilän tutkimus-, tuotekehitys- ja tuotantotehtaaseen, joka rakennetaan Vaskiluotoon, Vaasaan. Koska laitevalintoja ei ollut tässä vaiheessa vielä tehty keskijännitekojeistojen suojaukseen, myös muiden laitevalmistajien vaihtoehdot otettiin huomioon SSC600:n lisäksi.
Tutkimus alkoi perehtymisellä releen ominaisuuksiin ja käyttöohjeisiin sekä selvittämällä valmistajalta, onko laitteen mahdolliselle käytölle tulevaisuudessa esteitä. IEC 61850 standardi määritteli järjestelmän laitevalinnat ja kommunikoinnin tuli tapahtua noudattaen standardin protokollaa.
Suunnitellun järjestelmän luotettavuus ja turvallisuus olivat tärkeitä asioita. Verkko tulee olemaan monimutkainen uudessa tehtaassa ja se vaatii suojalaitteilta monia suojausfunktioita, sekä varmatoimisia lukituksia. Järjestelmän laajennettavuus ja muokattavuus tulisi olla myös mahdollista. Selvityksen mukaan SSC600:lla voidaan toteuttaa yhdessä muiden suojauslaitteiden kanssa toimiva ja IEC 61850 yhteensopiva järjestelmä keskijännitekojeistojen suojaukseen.
Tämä opinnäytetyö antaa yritykselle tietoa laitteesta ja sen ominaisuuksista, jota voidaan käyttää hyväksi, kun laitevalinnat uuteen tehtaaseen tulevat ajankohtaisiksi. Opinnäytetyö antaa hyvän yleiskuvauksen yritykselle SSC600:n ominaisuuksista. The objective of this thesis was to find out on a general level if the ABBs new SSC600 Smart Substation Control and Protection relay is suitable for the Medium Voltage Switchgear to be used in Wärtsilä’s new Smart Technology Hub, which is going to be built in Vaskiluoto, Vaasa. No decisions were made regarding protec-tion devices for switchgear at this point of making thesis, so devices from other manufacturers were also considered as an option.
The research started by getting introduced to the SSC600, reading manuals and asking questions from the manufacturer if there are any constraints for the use of the device in new STH in the future. IEC 61850 standard set the frames for the thesis and the planned system and the Intelligent Electrical Devices should be in-teroperable with the standard.
In the making process of this thesis, the reliability and safety of the planned sys-tems were the main thing. The grid in the new factory is going to be complex, many different protection functions are necessarily and interlockings need to be certain. Still the system needs to be editable for the possible extensions and changes. Based on the conclusions, the SSC600 is suitable for the use and togeth-er with the other IEDs, it is possible to build a functional system for a protection and control.
This thesis gives information and a good overall picture about the SSC600 to the company and it can be used, when decisions are made about the devices for the new STH.
Tutkimus alkoi perehtymisellä releen ominaisuuksiin ja käyttöohjeisiin sekä selvittämällä valmistajalta, onko laitteen mahdolliselle käytölle tulevaisuudessa esteitä. IEC 61850 standardi määritteli järjestelmän laitevalinnat ja kommunikoinnin tuli tapahtua noudattaen standardin protokollaa.
Suunnitellun järjestelmän luotettavuus ja turvallisuus olivat tärkeitä asioita. Verkko tulee olemaan monimutkainen uudessa tehtaassa ja se vaatii suojalaitteilta monia suojausfunktioita, sekä varmatoimisia lukituksia. Järjestelmän laajennettavuus ja muokattavuus tulisi olla myös mahdollista. Selvityksen mukaan SSC600:lla voidaan toteuttaa yhdessä muiden suojauslaitteiden kanssa toimiva ja IEC 61850 yhteensopiva järjestelmä keskijännitekojeistojen suojaukseen.
Tämä opinnäytetyö antaa yritykselle tietoa laitteesta ja sen ominaisuuksista, jota voidaan käyttää hyväksi, kun laitevalinnat uuteen tehtaaseen tulevat ajankohtaisiksi. Opinnäytetyö antaa hyvän yleiskuvauksen yritykselle SSC600:n ominaisuuksista.
The research started by getting introduced to the SSC600, reading manuals and asking questions from the manufacturer if there are any constraints for the use of the device in new STH in the future. IEC 61850 standard set the frames for the thesis and the planned system and the Intelligent Electrical Devices should be in-teroperable with the standard.
In the making process of this thesis, the reliability and safety of the planned sys-tems were the main thing. The grid in the new factory is going to be complex, many different protection functions are necessarily and interlockings need to be certain. Still the system needs to be editable for the possible extensions and changes. Based on the conclusions, the SSC600 is suitable for the use and togeth-er with the other IEDs, it is possible to build a functional system for a protection and control.
This thesis gives information and a good overall picture about the SSC600 to the company and it can be used, when decisions are made about the devices for the new STH.