The Process of Defining the Radio Frequency Hardware Verification Way of Working Model at Nokia Corporation
Haaranen, Anni (2019)
Haaranen, Anni
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019101419917
https://urn.fi/URN:NBN:fi:amk-2019101419917
Tiivistelmä
The target of this bachelor’s thesis was to describe and prove the methods that were used to set up and manage the work of updating the WoW material for Radio Frequency Verification process areas. The acquired knowledge base gathered for the project, the methods that were used to conduct the study and the ways in which the project was implemented to achieve the target, are described in this report. The thesis work was commissioned by Nokia Corporation in the Spring of 2019. The target of the project was to present the HW Verification WoW in a unified way. To achieve the target, it was decided to set up a Sharepoint page collection and templates to collect the material. A semi-structured face-to-face interview technique was used to collect information and to form a high-level picture of each of the areas. The project was planned and conducted using project management principles. The project consisted of six different scheduled stages that were monitored by the project manager. This project and its results were perceived very important by the Nokia management. The main results of the project were the process descriptions from each area, the templates created for the process, the Sharepoint pages created for the material and the lessons learnt. The next stage would be to use the templates and the results to define the WoW of all areas in the RF area.