Hallin rakennussuunnittelu sekä rungon kustannusvertailu
Heikkinen, Eetu (2020)
Heikkinen, Eetu
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202005077836
https://urn.fi/URN:NBN:fi:amk-202005077836
Tiivistelmä
Opinnäytetyön aiheena oli tehdä rakennusliikkeelle betonihallin alustavat rakennussuunnitelmat. Lisäksi tavoitteena oli laatia kustannusvertailu rungon rakenteista paikallavalu- ja elementtiraken-tamisen välillä. Rakennussunnittelussa tutkittiin, onko tontille mahdollista tehdä kellaria hallin alle. Tavoitteena oli myös suunnitella järkevä pohjaratkaisu ja käyttää neliöt tehokkaasti. Tilaajan toi-veena oli saada hallista mahdollisimman suuri, jotta halliin saataisiin paljon vuokratilaa. Kustannus-laskennan tavoitteena oli selvittää paikallavalu- ja elementtirakentamisen väliltä kustannustehokkaampi menetelmä. Työn tilaajana toimi Lapra Oy Siilinjärveltä.
Työn alussa tutustuttiin halli- ja toimistotilojen rakentamismääräyksiin ja lakeihin. Seuraavaksi suunniteltiin luonnosvaiheen rakennuspiirustukset Autocad 2019 -ohjelmistolla. Rakennussuunnit-telun jälkeen laadittiin tilapohjainen kustannusarvio koko hankkeesta ja rakennusosa-arvio raken-nuksen rungosta sekä seinä- ja vesikattorakenteista. Kustannusarvioiden laskentaan käytettiin Haahtelan Kustannustieto TAKU® -ohjelmistoa sekä Excel -ohjelmistoa.
Tuloksena tästä opinnäytetyöstä tilaaja sai kaksi erilaista luonnosvaiheen rakennussuunnitelmaa tulevaan halliprojektiin sekä valmiin kustannusarvion. Tilaaja sai myös erittäin tarkan kustannuslas-kentataulukon halli- ja toimistotiloihin liittyviin rakenteisiin. Tätä tilaaja pystyy käyttämään saman-kaltaisissa hankkeissa jatkossakin. The subject of this final project was to make sketches of construction drawings of a concrete hall for a construction company. The aim was also to make a cost comparison of frame structures between cast-in-place and prefabricated construction. In the construction design it was inspected whether it would be possible to build a basement under the hall. Another objective was to make a reasonable floor design and use the area efficiently. The client wanted to make the hall as large as possible to get lot of premises to be rented. The aim of the cost accounting was to find out the most cost-effective technique between cast-in-place and prefabricated construction. The work was commissioned by Lapra Oy from Siilinjärvi.
At the beginning of the work, the building regulations and laws for hall and office spaces were explored. Next, the sketches of construction drawings were designed with Autocad 2019 software. After the construction design, a space-based cost estimate was prepared for the entire project and an estimate of structural components for the building frame as well as the wall and roof structures. Haahtela Kustannustieto TAKU® and Excel software were used to calculate the cost estimates.
As a result of this project, the client was provided with two different sketches of construction drawings for the future hall project as well as a completed cost estimate. The client also received a very accurate cost calculation table for the structures related to the hall and office premises. The client will be able to use this table for similar projects in future.
Työn alussa tutustuttiin halli- ja toimistotilojen rakentamismääräyksiin ja lakeihin. Seuraavaksi suunniteltiin luonnosvaiheen rakennuspiirustukset Autocad 2019 -ohjelmistolla. Rakennussuunnit-telun jälkeen laadittiin tilapohjainen kustannusarvio koko hankkeesta ja rakennusosa-arvio raken-nuksen rungosta sekä seinä- ja vesikattorakenteista. Kustannusarvioiden laskentaan käytettiin Haahtelan Kustannustieto TAKU® -ohjelmistoa sekä Excel -ohjelmistoa.
Tuloksena tästä opinnäytetyöstä tilaaja sai kaksi erilaista luonnosvaiheen rakennussuunnitelmaa tulevaan halliprojektiin sekä valmiin kustannusarvion. Tilaaja sai myös erittäin tarkan kustannuslas-kentataulukon halli- ja toimistotiloihin liittyviin rakenteisiin. Tätä tilaaja pystyy käyttämään saman-kaltaisissa hankkeissa jatkossakin.
At the beginning of the work, the building regulations and laws for hall and office spaces were explored. Next, the sketches of construction drawings were designed with Autocad 2019 software. After the construction design, a space-based cost estimate was prepared for the entire project and an estimate of structural components for the building frame as well as the wall and roof structures. Haahtela Kustannustieto TAKU® and Excel software were used to calculate the cost estimates.
As a result of this project, the client was provided with two different sketches of construction drawings for the future hall project as well as a completed cost estimate. The client also received a very accurate cost calculation table for the structures related to the hall and office premises. The client will be able to use this table for similar projects in future.