Testing of Thermal Overload Protection for Rotors with Automatic Test System
Laakso, Hanna (2022)
Laakso, Hanna
2022
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2022052612323
https://urn.fi/URN:NBN:fi:amk-2022052612323
Tiivistelmä
Opinnäytetyön tarkoitus oli testata uuden suojausfunktion, Roottorin termisen ylikuormitussuojan, toiminta käyttäen ATS-testausjärjestelmää. ATS-järjestelmä (Automatic Test System) automatisoi suojareleiden toimilohkojen testien suorituksen. ATS-testaus on osa toimilohkojen kehittämisprosessia ABB:lla.
Työssä tutustuttiin funktion sekä ATS-testausjärjestelmän toimintaan ABB:n sisäisten dokumenttien avulla, minkä jälkeen laadittiin kokoelma testejä ATS-tietokantaan. Tämän jälkeen alkoi vaihe, jossa testejä suoritettiin sekä niiden tuloksia analysoitiin. Tulosten perusteella testeihin ja funktioon tehtiin tarvittavia korjauksia, minkä jälkeen testit suoritettiin uudelleen. Lopulliset testien tulokset osoittavat, että suojausfunktio toimii halutulla tavalla.
Työ oli tärkeä, sillä testauksen myötä löytyneet ongelmat voitiin korjata ennen funktion julkistamista. Lisäksi luodut testit mahdollistavat funktion vaivattoman testauksen tulevaisuudessa. Työn tavoitteet onnistuttiin saavuttamaan, sillä suojausfunktion oikeanlainen toiminta onnistuttiin varmistamaan testauksen avulla. The purpose of this thesis was to test the functionality of a new protection function, thermal overload protection for rotors, by using the Automatic Test System (ATS). ATS testing is a part of the development process of the IED functions at ABB.
In the beginning of this project the protection function and the ATS were studied with the help of internal documentation from ABB. After this a set of test cases were created in the ATS database. In the testing part of this thesis, some corrections were made to the created test cases and to the protection function based on the initial test results. After making the corrections, the tests were re-executed. The final test results indicate that the function operates in a correct way.
In the testing phase of this thesis, some issues were discovered in the functionality of the protection function. The fact that these issues were found, made it possible to perform proper corrections to the function before its release. The test cases created during this project make future testing of the function easier. The goals of this thesis were achieved, as the correct functionality of the protection function was verified.
Työssä tutustuttiin funktion sekä ATS-testausjärjestelmän toimintaan ABB:n sisäisten dokumenttien avulla, minkä jälkeen laadittiin kokoelma testejä ATS-tietokantaan. Tämän jälkeen alkoi vaihe, jossa testejä suoritettiin sekä niiden tuloksia analysoitiin. Tulosten perusteella testeihin ja funktioon tehtiin tarvittavia korjauksia, minkä jälkeen testit suoritettiin uudelleen. Lopulliset testien tulokset osoittavat, että suojausfunktio toimii halutulla tavalla.
Työ oli tärkeä, sillä testauksen myötä löytyneet ongelmat voitiin korjata ennen funktion julkistamista. Lisäksi luodut testit mahdollistavat funktion vaivattoman testauksen tulevaisuudessa. Työn tavoitteet onnistuttiin saavuttamaan, sillä suojausfunktion oikeanlainen toiminta onnistuttiin varmistamaan testauksen avulla.
In the beginning of this project the protection function and the ATS were studied with the help of internal documentation from ABB. After this a set of test cases were created in the ATS database. In the testing part of this thesis, some corrections were made to the created test cases and to the protection function based on the initial test results. After making the corrections, the tests were re-executed. The final test results indicate that the function operates in a correct way.
In the testing phase of this thesis, some issues were discovered in the functionality of the protection function. The fact that these issues were found, made it possible to perform proper corrections to the function before its release. The test cases created during this project make future testing of the function easier. The goals of this thesis were achieved, as the correct functionality of the protection function was verified.