Automated device for Raspberry Pi Pico recovery
Harvey, Visa (2023)
2023
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202305088232
https://urn.fi/URN:NBN:fi:amk-202305088232
Tiivistelmä
The aim of this project was to create a standalone Raspberry Pi Pico recovery platform, able to initialise and recover a target Pi Pico development board to initial usable state or recover a MicroPython installation from a non-accessible or booting startup script. The platform was to be created with a simple to use interface and a standalone method to update recovery images via any computer without utilising additional software.
The primary software functionality side of this thesis was achieved to a required level, with potential for further development to increase robustness. On the hardware side further development for target board interfacing and packaging into a standalone unit still needs to be researched and designed to achieve a fully complete practical solution.
The primary software functionality side of this thesis was achieved to a required level, with potential for further development to increase robustness. On the hardware side further development for target board interfacing and packaging into a standalone unit still needs to be researched and designed to achieve a fully complete practical solution.