ABB FIM-järjestelmän käyttöönotto ja opas
Rantala, Peetu (2023)
Rantala, Peetu
2023
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2023051210480
https://urn.fi/URN:NBN:fi:amk-2023051210480
Tiivistelmä
ABB FIM-järjestelmällä voidaan seurata HART-väylää hyödyntäen automaatiokenttälaitteita. Opinnäytetyön tarkoituksena oli tehdä FIM-järjestelmän käyttöönotto ja opas, jossa käydään läpi FIM-järjestelmän eri ominaisuuksia. Työn tarkoituksena on nopeuttaa ja helpottaa kunnossapidon työtä, jolloin aikaa säästyy muihin töihin. Työn tavoitteena oli luoda selkeä kokonaisuus, jota voidaan hyödyntää apuna järjestelmää käytettäessä. Työ tehtiin Kokkolan suurteollisuusalueella sijaitsevalle Jervois Finland Oy:lle.
Työssä käydään läpi eri käsitteitä, jotka liittyvät FIM-järjestelmään. Työn suorittamisen alkuvaiheessa kartoitettiin automaatiolaitteet, joille piti ladata uudet laitepaketit. Tämän jälkeen suoritettiin käyttöönotto, johon sisältyi laitepakettien lataaminen ja automaatiolaitteiden päivittäminen uusilla laitepaketeilla FIM-järjestelmään. Työn yhteydessä lisättiin myös positiotageja automaatiolaitteille FIM-järjestelmässä, sillä monen vanhemman laitteen kohdalla positiotunnusta ei ollut määritetty. Lopuksi yhteenvedossa käydään läpi työn suorittamisen aikana tulleet onnistumiset ja ongelmat, joita muodostui. The ABB FIM system can be used to monitor automation field devices by utilizing the HART signal. The objective of the thesis was to make an implementation of the FIM system and a guide that goes through the different features of the FIM system. The purpose of the work is to help facilitating the maintenance work, so that time can be saved for other tasks. The goal of the work was to create a clear entity of the FIM system and its features, so that the system can be utilized more efficiently in every day work. The work was done for Jervois Finland Oy, which is located in the industrial area of Kokkola.
The work covers various concepts related to the FIM system. In the initial phase of the work all the automation devices that needed to have new device packages were mapped. After all the new device packages were found they were loaded into the FIM system and automation devices were updated with the new packages. Work also included defining position tags using the FIM system for older automation devices. Finally, in the summary, the successes and problems that came during the execution of the work are reviewed.
Työssä käydään läpi eri käsitteitä, jotka liittyvät FIM-järjestelmään. Työn suorittamisen alkuvaiheessa kartoitettiin automaatiolaitteet, joille piti ladata uudet laitepaketit. Tämän jälkeen suoritettiin käyttöönotto, johon sisältyi laitepakettien lataaminen ja automaatiolaitteiden päivittäminen uusilla laitepaketeilla FIM-järjestelmään. Työn yhteydessä lisättiin myös positiotageja automaatiolaitteille FIM-järjestelmässä, sillä monen vanhemman laitteen kohdalla positiotunnusta ei ollut määritetty. Lopuksi yhteenvedossa käydään läpi työn suorittamisen aikana tulleet onnistumiset ja ongelmat, joita muodostui.
The work covers various concepts related to the FIM system. In the initial phase of the work all the automation devices that needed to have new device packages were mapped. After all the new device packages were found they were loaded into the FIM system and automation devices were updated with the new packages. Work also included defining position tags using the FIM system for older automation devices. Finally, in the summary, the successes and problems that came during the execution of the work are reviewed.