Pilvipohjainen tuotannonseurantajärjestelmä ja päätelaitteet : Turun telakan putkisovitetyöpajalla
Virolainen, Luukas (2024)
Virolainen, Luukas
2024
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2024122438119
https://urn.fi/URN:NBN:fi:amk-2024122438119
Tiivistelmä
Tämän opinnäytetyön toimeksiantajana on Meyer Turku Oy. Työ koskee Turun telakan konevarusteluosaston putkipajalla sijaitsevaa pilvipohjaista tuotannonseurantajärjestelmää. Työn tarpeellisuus huomattiin, kun kyseisestä järjestelmästä ja sen jatkokehityspotentiaalista ei oltu tehty aikaisempaa tutkimusta toimeksiantajayrityksessä. Sen lisäksi järjestelmän kanssa päivittäin työskentelevät henkilöt olivat huomanneet ongelmia järjestelmän käyttöä tukevien päätelaitteiden toiminnassa. Työn tavoitteina oli tehdä Tulip-tuotannonseurantajärjestelmän toiminnan kuvaus putkipajalla, sen toimintaa haittaavien tekijöiden varmistus ja tunnistus, sekä uusien päätelaitteiden kartoitus- ja hankintatoimet. Laitteiden kartoituksen ja hankinnan lisäksi toiminnanohjausjärjestelmän pajan nimenomaisten toimintaperiaatteiden havainnollistamistarkoitusta varten tavoitteena oli myös kuvata putkipajan prosessi tuotannonseurannan osalta. Työtä voidaan käyttää perehdytysmateriaalina, ja materiaalina järjestelmän jatkotutkimukselle telakalla.
Tuloksina työllä saatiin tehtyä järjestelmän vanhentuneiden päätelaitteiden tilalle uudet päätelaitehankinnat seurantajärjestelmän tueksi, sekä putkipajan tuotantoprosessin seurantajärjestelmän kuvaus tueksi Tulip-järjestelmän jatkokehitystä varten kohdeorganisaatiossa. This thesis was commissioned by Meyer Turku Oy. The study focuses on a cloud-based production monitoring system located in the piping workshop of the machinery outfitting department at the Turku shipyard. The need for commissioning this thesis arose when it was noted that no significant previous research, other than the starting pitches and presentations for procuring the system for the needs of the piping workshop, had been conducted on this system or its potential for further development within Meyer Turku. Additionally, employees working with the system on a daily basis had observed issues with the performance of the allocated terminal devices supporting its use.
The objectives of this thesis were to provide a functional description of the Tulip production monitoring system in the piping workshop, to identify and verify factors affecting its performance like faulty hardware, and based on the findings, to conduct a survey and procurement of new terminal devices. Along with the device improvement and procurement, another goal was to describe the pipe workshop’s process in the context of the Tulip production monitoring system in order to clarify the specific operational principles of the production control system within the company. The thesis can be used in the future as onboarding material and as a resource for further research and development of the system within the shipyard. The results include a survey of matters affecting the replacement of outdated terminal devices, new terminal acquisitions to support the monitoring system, and a description of the pipe workshop’s production monitoring system in the context of its manufacturing process.
Tuloksina työllä saatiin tehtyä järjestelmän vanhentuneiden päätelaitteiden tilalle uudet päätelaitehankinnat seurantajärjestelmän tueksi, sekä putkipajan tuotantoprosessin seurantajärjestelmän kuvaus tueksi Tulip-järjestelmän jatkokehitystä varten kohdeorganisaatiossa.
The objectives of this thesis were to provide a functional description of the Tulip production monitoring system in the piping workshop, to identify and verify factors affecting its performance like faulty hardware, and based on the findings, to conduct a survey and procurement of new terminal devices. Along with the device improvement and procurement, another goal was to describe the pipe workshop’s process in the context of the Tulip production monitoring system in order to clarify the specific operational principles of the production control system within the company. The thesis can be used in the future as onboarding material and as a resource for further research and development of the system within the shipyard. The results include a survey of matters affecting the replacement of outdated terminal devices, new terminal acquisitions to support the monitoring system, and a description of the pipe workshop’s production monitoring system in the context of its manufacturing process.